Showing posts with label Simplex. Show all posts
Showing posts with label Simplex. Show all posts

Monday, 30 March 2020

Simplex Locomotives at Work by Alan M. Keef

This paperback book is simply a celebration of the Simplex, being a collection of photos of these small yet characterful locos working around the globe. About half of the book is dedicated to locos working here in the UK, but the rest of the world has not been forgotten, featuring industries varying from Swedish timber yards, to Australian sugar cane to African gold mining to Malaysian palm oil to logging in Borneo.


Not all of the photos are of industrial railways though, pleasure and preservation also feature, often using photos of the same loco in industrial and later pleasure/preservation use.


Both narrow and the scarcer standard gauge Simplexes get a viewing, and pretty much every model of loco that Motor Rail made is shown, although some bear scant resemblance to anything coming out of Elstow Road in Bedford, once the home of Simplex Works and now a housing estate.


All photos have extensive and informative captions, hardly surprising as Alan Keef Ltd (the auther's company) are the successors to Motor Rail and therefore have access to Motor Rail's archives. Photos are a mixture of black and white and colour, and are clearly reproduced and the book well laid out, as can be expected from Lightmoor Press.

Highly recommended to any lover of industrial railways, especially those odd little narrow gauge lines.

Simplex Locomotives at Work, Alan M. Keef, Lightmoor Press, ISBN: 9781911038 55 9

Paul.

Wednesday, 31 May 2017

Another Saltford Simplex rebuild.

This is the second Saltford Models Simplex that I built, probably in about 1988. It was still in one piece, but the motor gave out a long time ago so I decided to rebuild it with a new drivetrain and motor, I've done one before but this time I did things slightly differently.
Here it is before the rebuild;



I machined new wheels from 10mm brass bar (CZ121), pretty much as covered here. There are of course a few differences, these are 6.4mm dia., stub axles are 1.6mm silver steel, the 3 holes are 1mm dia. at a 4.5mm PCD, and as the original wheels were 3mm wide there is a 1mm x 2.5mm dia. shoulder on the face.


The kit originally came with 12:1 ratio gears. I've replaced them with 15:1 gears, from Nigel Lawton, which have a centre to centre distance of 3.6mm, closely matching that of the original gears. The worm gear needed to be drilled out to 2.5mm (or therabouts, the muff was machined to suit), luckily its a nice fit in a 5mm collet. Again I've used Nigel Lawton 3mm root dia. pulleys to carry drive to the front axle along with a 12mm drive belt. Here's the wheelsets ready for use along with the old wheels for comparison;


As before the wheels have been treated with Birchwood Casey Brass Black.

On my last rebuild I replaced the cheapo motor with a Mashima 1015. However, Mashimas are becoming rather scarce now so as an alternative I fitted an open framed Kato motor taken from an 11-104 motorised chassis. These appear to be well made 5 pole jobs, and the whole chassis can be bought on eBay for less that the price of a new Mashima, assuming that you can find a new Mashima to buy of course. The Kato is slightly larger, measuring 16.5mm (34mm including shafts)  x 13.5mm x 9.5mm, with 1.5mm shafts;


Being double ended means of course that a flywheel can be fitted. I had to cut down the shaft, removing 3mm from the top (brush end).

Replacing the motor, drivetrain and wheelsets meant completely dismantling the loco. It was originally epoxied together, and came apart with little effort. I decided to only re-use the castings and replace the plasticard footplate and roof. One problem that I encountered was a loose bearing. When I built this loco I fitted brass axle bearings, supplied seperately by Saltford, rather than run the axles in the whitemetal frame castings. To fit them I had to open out the axle holes in the cast frames from 1/16" to 2mm. But I must have opened up one hole oversize as one bearing was a sloppy fit in the frame, the answer was of course to turn a new bearing to suit. Lathe ownership has many advantages.

Here's the frames with the new axles and driveband fitted;


As I wrote above, the motor needed the upper shaft shortening by 3mm, which I covered here. Once I'd fitted the worm (shortened from 6.5mm long to 5mm, another lathe job) it could be epoxied to the footplate;


The next step was to fit the basic bodywork (remember that only the basic castings were re-used), test run the loco, then fit a flywheel. This measured 11mm dia. x 3.5mm. After yet more test running the couplers, radiator, sandboxes, re-railing beams and front handrail could be fitted. The handrail was formed from .8mm brass rod and blackened with Birchwood Casey brass black. It looks pretty good so I haven't painted it, but the rest of the footplate and chassis is Phoenix Precision Dirty Black acrylic, leaving the original green paint untouched.

The roof is .020" styrene painted whilst off the body first with a coat Hycote auto primer followed by Revell Aqua Color 378 Dark Grey.





It now runs better than it ever did in its original form, the Kato motor, flywheel and 15:1 gearing making a big difference. It still needs to be 'driven', but I like that.

Paul.

Wednesday, 29 March 2017

Leander Architectural Open Day.

Leander Architectural is a small foundry based in Doves Holes, Derbyshire. They specialise in cast signposts, plaques, etc, see their website here. The company is run by Ted McAvoy, who is also a railway enthusiast. Around the rear of the works is a short 2" gauge railway and a collection of stock, including a Motor Rail Simplex. Today Ted had organised an open day, which will probably be the last as Ted is looking towards retirement. I took a day off work and headed over, camera in hand.

After signing in and paying a donation towards a Downs Syndrome charity (the day raised £315) I went around the side of the building, where stock sits in a couple of sidings;





An escaped slate rubbish waggon, note the double-flanged wheels;


The first 'loco' encountered was the diminutive 'Wasp', powered by what seems to be a motorcycle engine;


Running around the yard was 'Turbo Ted' (MR9543/50). Rebuilt at one stage by Alan Keef Ltd with an air-cooled Duetz diesel engine it is unusual in that the driver faces left when seated as opposed to facing right on a standard 20/28;



'TT' was being used to give rides along the 'U'shaped line;


I rather cheekily asked if I could have a drive of the Simplex, after explaining that I once rebuilt a 20/28. Ted quickly went over the controls and left me to it. I would have been happy with a quick run up and down but as people kept photographing and filming the loco at work I kept on driving, probably doing over a dozen runs. Which I have to say I rather enjoyed. A photo and brief description of this loco as re-built appears in 'Motor Rail Ltd' by Alan M. Keef.

On the flat wagon sits a Wingrove Rogers battery loco;



Human power was also represented;




The second one started life as an exercise bike! I had a play on it, interestingly it has a fixed wheel (its a long time since I rode a fixie!).

Inside the building sat a small copy of a Porter, recently imported from Australia;


And a Lister awaiting restoration;


Around the yard sit various wagons;








Whilst we were there we watched some castings being poured. The big blue box is an electric furnace;






Once the castings have cooled sufficiently the sand is knocked away;




Note the Hudson skip, is this the last skip in industrial use in the UK? Its in very good condition anyway;


And finally, a look at the track;


Points are of the 'kick across' type, typical of industrial narrow gauge concerns.

A good day out. With thanks to Ted for allowing us to visit, and to Mark for the tip-off.

Paul.

Don't forget that clicking on a photo brings up a larger image.

Wednesday, 8 April 2015

Nigel Lawton OO9 Simplex part 8 - radiator.

For such a small part of the loco the radiator is a rather complex assembly, so its getting a post all to itself. This is probably quite apt as the radiator, which sits lengthways along the front of the loco, is such a distinctive part of a Simplex.

The main body is a whitemetal casting, onto which various etched nickel-silver parts are attached. I elected to solder everything together, more sensible folk might decide that glue is a better option.

There are various holes to be drilled before starting, both for hoses and underneath for locating, once thats done the top and bottom flanges and the fan surround can be soldered in place, these will of course need tinning first whilst still attached to the etch. In the photo below the upper flange is attached;


A light touch with the iron and a tiny amount of solder is all thats required. Here's the fan surround and lower flange in place;


I'm not happy with the way the surround sits on the left side, but I didn't notice the problem until I'd soldered the lower flange in place. I'll just have to live with it.
Underneath can be seen the radiator bars and pivot etch. Once bent to shape this will surround the casting, with the hole on the right being the fan pivot;


A hole is drilled through the pivot hole into the casting, and a short length of wire inserted to make an axle for the fan, which comprises of an etch and turned pulley soldered together. Here's the other (right hand) side, showing the protection bars;


The radiator has an etched bracket at the front which sits on the footplate. This is folded up and soldered underneath the casting, along with a short length of .4mm wire which locates in an etched hole in the footplate. Another bracket sits on the top of the front crossmember and butts up against the rear of the radiator. Here it is soldered in place;


A fiddly job...
I soldered the radiator only at the front, where it meets the footplate. It took me a couple of attempts to get it to sit straight, and unfortunately I damaged the bottom of the casting with the iron. Luckily its difficult to spot but I'm still not happy. I glued the rear of the radiator to the crossmember bracket with a drop of cyano.

Next up are the hoses. The instructions only mention the top hose, which is .6mm brass rod, cyano'd into the casting and soldered to the underside of the bonnet. I've also added the bottom hose, from .4mm rod, and the overflow pipe, which sits on the opposite side. This is 38swg copper wire cyano'd into a .2mm hole, hardly worth the effort to be honest but for some reason I'm glad its there.

Here's a couple of photos of the radiator in place;



So that's the radiator. One casting, seven etched parts, one turned part, and five pieces of wire (of which two were my own additions).The level of detail in this kit is staggering!

All soldering done with my 25w Antex, using Eileen's Strong Flux and 188 degree solder for tinning and Carrs 70 degree for attaching the etches to the casting.

I once rebuilt the radiator on a full-size 20/28 Simplex. Two heavy castings formed the top and bottom tanks, held apart by steel side plates. Ribbed cooling tubes ran between the castings, held in place at both ends by rubber bungs. Each tube had to be pushed up through a bung into the top casting, then pulled down through the bottom bung. I can't remember how many ribs there were, but it wasn't a pleasant job as the ribbed tubes cut into your hands. It didn't leak though.

Paul.

Sunday, 8 March 2015

Nigel Lawton OO9 Simplex part 7 - detail overlays, sandboxes and major surgery.

The kit includes a fair number of detail overlays to be soldered on. I tinned each overlay whilst still attached to the etch, then soldered each on in place using my RSU set at 2 volts. There are twelve overlays that need adding to the frames. Six sit above the frame at the ends, four are attached to the lower sides at the ends and the other two sit inside the side channels. Positioning is straightforward, however care is needed on the four rectangular side overlays to make sure that the bolt detail sits correctly. Studying the line drawing in the instructions is necessary. Here it is with the overlays in place;


There are three more overlays to be added next, one on the engine side sitting above the channel frame representing the end of the engine, and two on the gearbox side, one below the frame and a smaller overlay above.



Sandboxes next, which are tinned on the etch, folded up, and soldered in place again using my RSU (still set at 2 volts). In the photo below one is fitted, one is folded ready and one in the flat;


The lids are folded down after fitting. A little fettling is needed to allow the lids to sit flat, and before closing the lids I filled each 'box with a tiny sliver of lead (aquarium plant weight), on a loco this size every little helps.


Note the RSU probe in the photo above. Probes are made from carbon rod and can be filed to suit a particular application, in this case the end is shaped to fit inside a sandbox.

Now for the surgery. There is of course one last sacrificial tab to be removed (well I hope its the last!), which is the one holding the frame to shape. This is cut down the middle with a cutting disc in a mini-drill;


Easier than it looks. And it looks easy.
A bit of folding to and fro and the tab just falls away;


And now body and chassis can finally meet;


All soldering done with 188 degree solder. Next job is to fit the bonnet.

The photos above were taken with my newly aquired Canon EOS1100D, using the aperture priority mode with the apperture set at f36.

Paul.