Showing posts with label Ruston. Show all posts
Showing posts with label Ruston. Show all posts

Sunday, 28 April 2024

Back to the Steeple Grange Light Railway

 Today I did something that I should have done a long time ago, that is I paid another visit to the delightful Steeple Grange Light Railway, located near Wirkswirth in Derbyshire. The last time I visited was back in 2017, so I was long overdue a return visit!

There are two lines, mainline and branch, and my £6 ticket allowed me to ride both. First of all I rode the branch. This is a short line into a quarry, and at the end we were treated to a talk about the limestone quarrying. Here's the train at the end of the branch, two rude trolleys topped and tailed by battery locos;

On returning to the main station I had time to talk to one of the volunteers and photograph their Ruston and some of their ex-mining stock;






I was the only passenger on the main line, accompanied by a few volunteers. I have to say that this is a very pretty and well kept line.





At the end I was given a little history lesson, and then it was time to return to the station;





On return to the station I snapped this little battery loco;


And this pointwork;


I then, after buying a cup of tea and a KitKat Chunky, took a walk down the branch to study the track;








Sleepers are on average 32" long, at between 16" to 22" spacing.

I make no apologies for this photo-heavy post, it's a very pretty line and part of the reason I went was to study the track.


Paul.

Wednesday, 20 May 2020

009 Ruston Proctor part 9 - finished.

After five years in the making, my Ruston Proctor is finally finished;


Note the warning gong on the right hand frame, this was turned from brass and polished with Brasso. A coat of Testors Dullcoat blended it in without losing the polished brass finish.


Those rather delicate spectacle plates are RT Models etched Manning Wardle items.


A coat of red paint helps the handwheel and brake lever stand out in the cab.


Those buffer/couplers are my own design, inspired by the prototype, the making of them can be seen here.

But, am I pleased with it? Well, sort of. Its overscale, but I can live with that. The scratchbuilt chassis runs well, if a tad noisy, so I'm happy with it. The chimney, turned from brass, is rather fine, as is the warning gong. The couplings follow the prototype, which is good, as does the interior. Frame detailing looks pretty good, although I can spot the mistakes, and the paint is as good as I could do given the surface that I had to deal with. Which leads me onto the printed body. Which is frankly awful. Shapeways have made a terrible job of the print which, without covering every square millimetre in filler and sanding back, was never going to look good. Every other printed loco body that has come through my hands except one has now been sold on untouched (the odd one out uses etched panels over a printed shell and is as yet unbuilt). I've decided that this will quite probably be the last printed loco that I will build, not only because of the surface finish issues but also because buying a one piece body and just adding a chassis does not appeal to me even with extra detailing, I like to be more involved in the build. There's also the material itself, which is both fragile and grainy and quite unpleasant to work with. So, as far as locos are concerned its back to brass and whitemetal for me.

Paul.

Saturday, 25 April 2020

009 Ruston Proctor part 8 - basic paintwork.

I decided on a livery of all over green with red buffer beams, applied with my airbrush.

Humbrol acrylic paints were chosen, gloss Brunswick Green and satin Signal Red. The gloss/satin finishes will be lost at the final stage when the model will be varnished.


I used de-ionised water as a thinner, but I wasn't happy with the performance of the paint. Despite being apparently well thinned it didn't flow through the airbrush as well as the Tamiya paint that I've used recently, in fact I had to up the pressure on the compressor a couple of times when spraying, ending up spraying at about 22-24psi. This might be down to the way I've thinned the paint, or it could be that I used only water to thin. If I were to use Humbrol again I may try screenwash as an alternative.


I'm not overly happy with the finish, which is mainly down to the poor print rather than my painting, certainly the parts that I've added (bufferbeams and frames) have a smoother finish than the main body. I was never going to get a decent finish on the body, so I'm afraid that its just going to have to do as it is. The detail on the axleboxes however has come up rather well.

The next job will be to do any touching up required and to paint the cab interior, by brush, before final detailing and finishing.

Paul.

Friday, 17 April 2020

009 Ruston Proctor part 7 - cab interior.

The inside of the cab needed a little detail. There's little to be seen in there on the prototype, which made life easier.

A curved plate was formed from brass sheet to form the cab lower frontplate. To this I soldered a stub of flattened wire on the left, to represent what I believe is the reversing lever, and on the left a short piece of wire was soldered in place for a handwheel to locate on;


The handwheel is a Cambrian item, C42 Brake Handwheels. I used a moulded 'wheel rather than an etched one as I wanted something with a bit more 'presence' when viewed side on.

The brake sits low in the cab, and can be seen in the foreground of these photos. Its basically a short length of scrap etch with two short pieces of brass wire soldered in the ends. One end sits in a hole drilled in the cab front, and the other has a tiny turned brass weight sat on it;


Here's a photo, taken at an odd angle, of the assembly in place showing how it all sits together;


The frontplate will be glued in place next after receiving a coat of primer, but the handwheel and brake lever will be fitted at the finishing stage so that they can be painted separately.

The handwheel is used to engage clutches, turning it one way selects first gear, and the opposite way selects second, neutral presumably being centre.

The next job will involve throwing paint around.

Paul.

Wednesday, 15 April 2020

009 Ruston Proctor part 6 - frame detailing.

I've added some basic detail to the frame sides. Nothing too special, just enough so that something is there sitting in roughly the right place. Rivet detail has been ignored, well, there are limits...


Most of the detail has been added from microstrip, apart from the axlebox covers, which were turned from scrap styrene sprue, and the coil springs that sit above the leaf springs which are cut from that strange red styrene rod Slaters sell, with the reverse side filed flat. Some will no doubt wonder why I didn't use a section from a small screw, that was the original idea but as the piece is less that 2mm long and in shadow it just didn't justify the effort.


There are 27 separate parts per side. Which is quite enough thank you. Some parts are layered, which usefully adds different levels of relief to the frames. I still need to turn up a brass warning gong for the right hand side.


Its not perfect, but its good enough for this loco. The next job will be to make up a simple cab interior.

Paul.

Friday, 31 August 2018

On the cover!

A while ago I built a narrow gauge Ruston 48DS, based on the preserved example at Irchester Narrow Gauge Railway Museum. I've always been rather pleased with it, in fact I'd say that its my best work to date. So, I wrote a short article on the build and sent it off to the editor of 009 News along with a few photographs. Yesterday the latest copy landed on my doorstep;


I have to say that I'm quite chuffed! Not only has my article appeared in print, but my loco made it onto the cover as well. Happy days!

Paul.

Sunday, 23 April 2017

A visit to the Steeple Grange Light Railway.

Today I found myself in Wirksworth. I went to compete in the Wirksworth Incline Fell Race, and as the Steeple Grange Light Railway was nearby I decided that a visit, long overdue, would be in order.


The railway is built to 18" gauge and runs along the Killer Branch, an old limestone quarry branch line. We were met by friendly and enthusiastic staff, and after buying our tickets and liberating Small Dog from the car (the railway is dog friendly) our train arrived in the platform, returning from a line inspection. This consisted of a Greewood Batley (GreenBat) battery electric loco and a mine manrider, a crude form of carriage that was built to carry miners undergound, in rather cramped conditions!



The ride took about 20 minutes along a very picturesque route mostly through cuttings. Small Dog didn't appreciate the ride, but then he's never been keen on train rides. At the furthest end one of the volunteers gave us a brief history of the branch and of the associated quarries, and again on the return we stopped close to the carriage sheds so that we could see some of the stock.
Outward bound;




On the way back;







I did hope to ride behind the resident Ruston but it was having its injecters bled as we arrived;


But after our ride it was up and running again, and being used to collect a wagon from the carriage shed

Here's some more photos from the day, first up a couple of tubs;




Another battery loco;






And a Hibberd or two;




The view looking away from the main building;


And lastly;


This fenced-off section goes out in the opposite direction from the station end. I forgot to ask whether its in use or not.

A very friendly very pretty railway, well worth a visit.

Paul.