Invicta Model Works RAF Calshot open wagon - adding the bodywork

As you'd expect the floor is just glued on top of the chassis, then the ends can be fitted and checked with a square;

Here's one end, with the uprights glued in place;

There's a little filling to be done where the uprights locate, not really an issue, and the uprights slot into holes in the chassis top.

The second end was a little wobbly so I taped it to the square whilst it set;

I used more tape when I added the sides;

Finally the hinge detail was glued into place, and the coupling hooks (pre-bent from copper) cyano'd into the buffer shanks;

So far everything has fitted together with no real issues.

Primer next along with some minor detailing.

Paul.